Skip to main content

Table 2.22 and Figure 2.4 show the inputs to mills that produce wood-based panels in the UK. The mills used a total of 3.9 million tonnes of material in 2015, unchanged from 2014. The inputs in 2015 comprised 1.3 million green tonnes of roundwood (34%), 1.7 million green tonnes of sawmill products (43%) and 0.9 million tonnes of recycled wood fibre (22%).

Table 2.22 Inputs to wood-based panel mills, 2006-2015
Year UK roundwood1 Sawmill products Imports2 Total
Soft wood Hard wood Soft wood Hard wood Soft wood Hard wood Soft wood Hard wood Recycled wood fibre3
thousand green tonnes
2006 1 365 1 1 794 0 3 0 3 162 1 1 173
2007 1 362 5 1 940 0 2 0 3 304 5 1 230
2008 1 219 2 1 591 0 0 0 2 810 2 1 119
2009 1 135 1 1 435 0 0 0 2 570 1 1 065
2010 1 375 1 1 631 0 7 1 3 013 2 1 120
2011 1 417 1 1 779 0 0 0 3 196 1 952
2012 1 269 2 1 851 0 0 0 3 120 2 909
2013 1 263 0 1 709 0 0 0 2 972 0 853
2014 1 283 0 1 809 0 0 0 3 092 0 812
2015 1 334 0 1 687 0 12 5 3 033 5 852

Source: Wood Panel Industries Federation

Notes:

1. UK roundwood derived from stemwood.

2. Imports include roundwood, wood products and products from imported wood.

3. Recycled wood fibre is wood fibre recovered from both pre- and post-consumer wood waste for use in wood-based panel production. Quantities are as delivered.

Figure 2.4 Inputs to wood-based panel mills

fs2016fig2-4.png

Note:

1. Recycled wood fibre data not available before 1999.

Source: Wood Panel Industries Federation

Tools & Resources
In this section
Tools & Resources